| « DSCP to TOS (Decimal) |
How to set Unified Communication Manager time
NTP Configuration
This configuration applies to version 4.3 and earlier.
The publisher should point to a dedicated NTP external time source.
The subscribers should point to the publisher server.
Complete the following steps:
1. Disable the Windows Time service (W32Time) on the server.
Open the Windows Services snap-in.
Right click the Windows Time service and select properties.
In the Startup Type box, choose Disabled from the drop-down list.
Click OK.
2. Edit the NTP demon configuration file. (ndpd.conf)
The ntpd.conf file is located in the "C:\WINNT\system32\drivers\etc" folder.
Edit the file so it contains the required NTP server(s).
Sample:
server 10.20.30.10
server 10.20.30.11
driftfile C:\WINNT\system32\drivers\etc\ntp.drift
This entry was posted on October 25th, 2009 at 09:28:49 pm by admin and is filed under Cisco Unified Communication Manager, Call Control.
Feedback awaiting moderation
This post has 70 feedbacks awaiting moderation...
Comment feed for this post